Front Mower Accessories
Husqvarna Front mowers are equipped with a front-mounted and low profile cutting deck. It will provide you with an excellent overview of the working area, enabling precise, close-up trimming. It also gives you unbeatable accessibility in under fences, bushes, park benches etc.
Cutting decks
Be sharp at all times and find the right cutting deck for your Rider. A Combi deck that combines BioClip® cutting and rear ejection in the same deck.
Our Combi Cutting Decks offer two cutting methods: BioClip® and rear ejection. As the deck is stamped from a single piece of metal, with no seams and sharp bends to trap cuttings, the result is market-leading mulching and super-efficient ejection.
High-performance 112 cm (44") Combi deck. An innovative technical solution from Husqvarna results in a combination deck with the cutting methods mulching and rear discharge included in one and same deck. Heavy-duty deck design consist of 1-piece stamped steel plate.
Our Combi Cutting Decks offer two cutting methods: BioClip® and rear ejection. As the deck is stamped from a single piece of metal, with no seams and sharp bends to trap cuttings, the result is market-leading mulching and super-efficient ejection.
High-performance 122 cm (48") Combi deck. An innovative technical solution from Husqvarna results in a combination deck with the cutting methods mulching and rear discharge included in one and same deck. Heavy-duty deck design consist of 1-piece stamped steel plate.
High-performance 132 cm (52") Combi deck. An innovative technical solution from Husqvarna results in a combination deck with the cutting methods mulching and rear discharge included in one and same deck. Heavy-duty deck design consist of 1-piece stamped steel plate dimension 4,5 mm (7-gauge). Shaft driven with bevelgear.
Husqvarna Combi Decks combine very efficient BioClip® mulching with rear discharge. The heavyduty design is stamped from one piece of 4.5 mm steel, which contributes to its high efficiency, thanks to the optimized airflow. All decks are equipped with replaceable side skid wears.
Attachment - Front-mounted
Make sure to always use your ride-on mower at its full potential. Husqvarna has a comprehensive range of front-mounted attachments for all kinds of purposes, such as brushing, snow removal and flail mowing.
Powerful rotating broom for sweeping leaves, gravel, snow, etc. Easily angled in both directions from the control panel at the driver's seat. Two rear solid support wheels follows the contour of the ground. Requires that the front mower has been equipped with 'Power outlet kit, Front'.
Highly efficient flail mower for rugged areas with overgrown grass and low bushes. Equipped with a durable miter gear, reinforced support wheels and height adjustment for maximum product life.
Highly productive and robust flail mower for rough areas with overgrown grass and brushwood. Shaft driven with bevelgear. Patented shark fin shredder for improved mulching, optimized housing for better flow of the cut grass, increased height adjustment range to cope with rough terrain, reinforced bevel gear for longer life time and increased area for skid plates for better flow on uneven surfaces. Requires counterweight. Suits P525D
Practical utility bucket in welded high-tensile steel for maximum durability. Hydraulic adjustment of angling and emptying. Requires hydraulic kit 966 75 45-01. Must be used with counterweight. Suits P525D, P525DX.
Robust, reliable flail mower for rough area clearing of overgrown grass and low brushwood. Working width 100cm.
Rotating broom for sweeping up gravel and leaves. Can be angled to either side. The broom includes a spray guard. Working width 120cm. Suits P524.
A rotating broom for sweeping leaves, gravel etc. Shaft driven with bevel gear and chain drive. Two rear solid support wheels. Requires hydraulic kit. Suits P525D, P525DX
Attachment - Rear-mounted
With Husqvarna’s rear-mounted attachments, including collectors, trailers, counter weights, moss rakes, aerators and spreaders, you can easily adapt your Rider to the season and situation.
Rear counterweight for improved grip and stability. Must be used with specified front-mounted attachments, always in combination with cabin. Total weight 62 kg. Includes 5 x 10 kg stackable weights and mounting frame.
Attachments
To be installed to rear position and turning lights kit. Includes number plate lightning. Suits P525D, P525DX
Orange rotating flashing light. To be installed to the ROPS bar. Post, wires and switch included. Suits P525D, P525DX
Rear position and turning lights to be mounted on ROPS bar. Adjustable position to enable folding of ROPS bar and narrow manoeuvring. Requires control box (966 79 08-01). Suits P525D, P525DX
To connect and control each function of the road kit. Mounts to steering column. Mandatory for front headlights, position and turning lights and license plate kit.
Forward headlight with front turning and position lights. To be mounted to a separate light bar in the front. Requires control box kit. Suits P525DX
Kit necessary for adaption of front-mounted attachments with hydraulic function. Includes two auxiliary hydraulic connections, valve, switch and hoses with connectors and wires. Suits P525D
Lubricants & Filling Equipment
By lubricating your Rider and using the right kind of fuel it will not only last longer, it will help you work optimally. We have a selection of lubricants and cans for easier work and better results.
A premium multi-grade engine oil specially designed for use with 4-stroke, air cooled engines. Specification: SAE10W30, API SM (Petrol) API CF-4 (Diesel)
15L Fuel Can for wheeled machines featuring three ergonomically positioned handles and specially designed spout. Easy to lift, carry and refuel, without any splash or waste.
Husqvarna multi spray oil is superb for lubricating, dissolving, cleaning and protecting your tools. Easy to apply with dual-nozzle 400ml spray can. This multi-function spray oil is your best friend in the workshop, ideal for cleaning dirty tools and parts, loosening rusted nuts and bolts, or proactive corrosion protection. Use it with spray nozzle or tube nozzle depending on task.